Welcome to the official website of Jiangxi Zhongpu Building Materials Technology Co., Ltd!
ASA Synthetic Resin Tile (Model 1050-219)
Category:
Keywords:
Email:
Product Description
- 产品描述
-
Product Specifications
- Thickness: 1.5–3.0mm, customizable
- Length: Customized according to multiples of the pitch
- Color: Bright Red、Grey、Dark Green、Bluish Grey、Brick Red
- Total width: 1050mm
- Effective width: 960mm
- Wave spacing: 160mm
- Wave height: 30mm
- Pitch: 219mm
Product Colors
Installation Guidelines for ASA Synthetic Resin Roof Tiles
1.Purlin Selection & Spacing
Purlins can be constructed from square tubes (60×40×3mm), C-channel steel (100×50×20×3mm), or anti-corrosion treated wood (60×40mm). The recommended purlin spacing is 660mm, with an upward installation arrangement.
2.Main Tile Installation
Install the main tiles according to the prevailing local wind direction. For reverse installation (against the wind direction), begin installation from the midpoint of the roof and work outwards.
3.Ridge Tile Installation- Before installing the main ridge tiles, cut a section from the first ridge tile to ensure a proper fit.
- The joints between main ridge tiles and hip ridge tiles must be cut neatly for a tight seal.
- Install three-way ridge tiles only after the main ridge tiles and hip ridge tiles are fully installed.
4.Fastening & Installation Requirements
- Pre-drill holes with an electric drill first, then secure the tiles with hook screws. The hole diameter must be 2mm larger than the hook screw to allow for thermal expansion.
- Hook screws should be tightened moderately — do not over-tighten them.
- We recommend using 6.3mm diameter self-tapping screws for all fastenings.
5.Cutting & Sealing
Use a fine-tooth saw for tile cutting. Adhesives may be used to seal the overlaps between two tiles.
6.Overlap & Roof Specifications- Longitudinal overlap between tiles should be at least 100mm.
- The recommended roof pitch is 1:5 to 1:6.
- For roofs with lateral pressure, the horizontal fastener spacing must not exceed 800mm.
Product Inquiry
We highly value your feedback and inquiries. If you have any questions about our products or services, please fill out the form below, and we’ll get in touch with you as soon as possible.
Consultation Hotline:
Jiangxi·Nanchang
address：No. 68, Dongyang Avenue, Jiangxi Anyi High-tech Industrial Park, China
Sichuan·Deyang
address：No. 1, Jiqing Avenue, Kaizhou New City Industrial Park, Deyang City, Sichuan Province, China
Jiangxi Zhongpu Building Materials Technology Co., Ltd
Contact Us
Copyright © 2026 Jiangxi Zhongpu Building Materials Technology Co., Ltd